Phosphorous Removal in Effluent Treatment Plant by Richa Environmental Services Pvt Ltd leading manufacturer of engineering based Sewage Treatment Plants Effluent Treatment Plants for Industries, factories, commercial sector, in New Delhi NCR India.
Feel Free to contact us for industry specific solution if you are facing issues and problems with phosphorus in your system.
Phosphorous presents in different forms in Effluent Treatment Plant ETP and Sewage Treatment Plants STP soluble phosphorus is most common form. Typical methods for phosphorus removal are:
membrane filtration ( Reverse Osmosis )
and biological method depending on in which form phosphorus is present.
Biological removal of phosphorus is widely spread as it produces less sludge when compared with other methods.
In the conventional treatment process soluble phosphorous present in the wastewater is getting integrated with microbial biomass.
Enhanced biological phosphorus removal processes is suggested for wastewater treatment higher amount of phosphorus removal is possible.
There are certain factors affecting phosphorus removal via biological method including environmental and operational conditions such as
solid retention time
Availability of carbon in the form of readily biodegradable carbonaceous oxygen demand affects phosphorus removal hence dosage of urea is recommended.
COD : Phosphorus Ratio
Recommended COD:P ratios between 10–20 mg-COD/mg phosphorus
Phosphorus itself is negatively charged hence addition of cation is recommended. Anion having three negative charges. Phosphorus cannot move across the cell membrane because of negatively charged , Its transportation across the microbial membrane need charge neutralization, neutralized ion is transported across the cell membrane. Hence cations increases Phosphorus removal
DO concentrations between 2.5–3.0 mg/L is recommended, higher DO will affect the performance of phosphorus removal
Solid Retention Time
Thankyou feel free to contact us for any advanced solution for your industry.